Have you ever thought it can be so simple to connect broken wires together? Here is the simplest and best solution for you. These Waterproof Solder Wire Connectors are made to allow people to connect wires without any technical background.
These connectors are AWESOME. I've done a lot of splicing in my life and I wish I had these before. They make splicing so quick and clean!
I used to extend wires on a Home Theater System. It is far superior to the traditional crimp butt joint. I used a heat gun to seal joint.
Best things since sliced bread.I have never used this connector design before and found that it is so much easier than manually applying solder. Used the Wagner HT400 heat gun on a test connection and it uniformly melted the solder, adhesive and tubing. I took it one step further and ran a continuity check with with the joint under water and no increase in resistance at all. Great design.
With this I don't have to go through the troublesome soldering process. All i need is this tube and a hair dryer. Solders my wires effectively and not breaking away.
Where have these been all my life!? It was so easy to splice the wires on my trailer. I used a propane torch being careful to let it heat the shrink wrap and not burn it. The solder ring started to disform a little right after the shrink wrap shrunk. Then it melted. It took a while longer than I expected to harden and I had to hold the wire still while it was cooling down. When it was done, the connection was perfect! Just strip a little, and I mean very little, wire. Push the two wires together from each end letting them overlap in the middle where the solder is. Heat and hold. You are done.
My friend from Navy told me it's what they have used on their ships and it gives me full confidence. Bought a set and tested it at home and it works perfect. No wonder it is used by the military.